No products in the cart.
The Quick EBSN Bilge switch is an electronic switch that allows the bilge pump to be operated in the presence of water.
- Operation managed by microcontroller.
- Advanced digital filter to distinguish the presence of water.
- Extended power supply range.
- Remote indication of operation status by led or remote control panel (optional).
- Manual remote pump switch-on by button or remote control panel (optional).
- Signal for prolonged bilge pump switch on (if led or remote control panel is installed).
- Protection against excessive battery rundown.
- Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat.
- Functioning over a wide range of environmental temperatures.
- Resin-coated watertight casing.
- Easy installation.
| Models |
EBSN 10 / EBSN 15 / EBSN 20 |
| Current carrying capacity of the relay contacts (Max) | 10 A / |
| Supply voltage (Except zone 15-20V DC battery save function for 24V DC systems) | 9 ÷ 31 Vdc |
| Current absorbed when idling | 7,5 mA (Typical value) |
| Operating temperature | from – 15 to + 71°C |
| Degree of protection | IP 68 |
| Switch-on delay | 5 sec |
| Switch-off delay | 20 sec |
| Casing material | Nylon |
| Dimensions W x H x D – inch |
75 x 83 x 38 mm 2”31/32 x 3″ 1/4 x 1”1/2 |
| Weight – lb |
415 g 0,91 lb |
Manufacturer Link – Italy
Reviews
There are no reviews yet.